Deck attachment

More
3 years 9 months ago #3169 by TOM PALLEN
Deck attachment was created by TOM PALLEN
As I understand it, decks on Whitby's are attached with either pop rivets or through bolted. Is there a way to determine which method was used on a particular boat without an actual examination? Perhaps manufacturing changes over the years? Appreciate any information you might have.

Please Log in or Create an account to join the conversation.

More
3 years 9 months ago #3170 by Terry Temperly
Replied by Terry Temperly on topic Deck attachment
You are yet another victim of a false urban legend. Many years ago somebody saw pop rivets and assumed that was the ONLY attachment method. In reality their inspection was incomplete, they failed to see the bolts that are also there. Pop rivets were a temporary "hold in place" until the Bolts were added. I have photos of bolts on my boat. If you dig around in the Forum history, much has been written about this.

Please Log in or Create an account to join the conversation.

More
3 years 9 months ago #3171 by TOM PALLEN
Replied by TOM PALLEN on topic Deck attachment
Terry, thanks for the reply. I'm new to the forum so I'll try to figure out where the history archive is and go thru it.

Please Log in or Create an account to join the conversation.

More
2 years 6 months ago #3531 by Ryan Nilsson
Replied by Ryan Nilsson on topic Deck attachment
I realise this thread is old but for anyone who might be looking for this information. Hull no.55 was just riveted, definitely no bolts.

Please Log in or Create an account to join the conversation.

More
2 years 6 months ago - 2 years 5 months ago #3532 by Steven Lott
Replied by Steven Lott on topic Deck attachment
@ Ryan Nilsson   What’s holding the toe rail on? I don't think it's rivets. Please check.
Last edit: 2 years 5 months ago by Steven Lott.

Please Log in or Create an account to join the conversation.

More
2 years 5 months ago - 2 years 5 months ago #3533 by Deborah Streeter
Replied by Deborah Streeter on topic Deck attachment
Please take a look at the article on re-bedding the cap rail. Self-tapping screws, recessed in the wood with bungs, we’re used to hold the cap rail in place. Pictures are included in the article. The deck to hull joint is explained. 

Free N Clear
Whitby 42, #70
Last edit: 2 years 5 months ago by Deborah Streeter. Reason: Clarification
The following user(s) said Thank You: Ryan Nilsson

Please Log in or Create an account to join the conversation.

Time to create page: 0.172 seconds
Powered by Kunena Forum