Install an AC/ Reverse Cycle for 1982 Whitby 42?

More
3 months 3 weeks ago #3043 by Jim Karas
Image that, we need Air Conditioning in Florida... so who out there has successfully installed a 30 A unit around 16,000 BTU or better? Any tips or lessons learned will be appreciated.
Ideally, will serve all 3 living areas including hard to get to aft cabin.
Do you have sketches or pictures of duct work, and location of unit? Thinking I could do 3 ducts, though extremely rare that all 3 would be open and used.

Sincere thanks,

Jim (jeakaras@gmail.com)
Aboard Windigo

Please Log in or Create an account to join the conversation.

More
3 months 2 weeks ago #3052 by Mark Popiel
Replied by Mark Popiel on topic Install an AC/ Reverse Cycle for 1982 Whitby 42?
Our Whitby has a Cruiseair system, with the compressor in the engine room, and two remote evaporator units, one in the V berth for the V berth and front of the main cabin, and the other in the aft cabin, for the aft cabin and rear of the main cabin. Installed by a previous owner. It looks like a complex install done professionally.
In Jacksonville Fl. in January the heating ability of this system was appreciated.

Please Log in or Create an account to join the conversation.

More
3 months 1 day ago #3095 by Robert Horn
Replied by Robert Horn on topic Install an AC/ Reverse Cycle for 1982 Whitby 42?
Our boat came with two units, one in the hanging locker across from the forward head and the other one in the cabinet at the head of the starboard bed. Both are Ocean Breeze units and I would never buy another one. They are the noisiest units I have ever dealt with. The compressors are extremely noisy and vibrate like crazy, everything around them vibrates. Also, there is only one fan speed, Hurricane force. Another issue, which probably doesn't apply in a new install, is that the fan outlet is fixed at either top, left or right. Most units I have dealt with, the fan cage can be rotated into just about any position, again, not a problem for a new install. They do have one advantage in that they are very compact, all the start/run capacitors and relays are in a separate box connected with a fairly long cable.
If you need heat I would definitely go with reverse cycle. One of the current units and a unit on a previous boat used electric heat and when the heat comes there better not be any other load.
The aft unit blew directly at the head of the person sleeping there, totally unacceptable. I had hoped to rotate the fan cage to blow up instead of to the right and duct the airflow up and then out at ceiling level. Unfortunately the cage cannot be re-positioned so I ended up moving the unit into the aft hanging locker. I called customer support to ask about the possibility of rotating the fan cage and was told it was possible but "it involves a lot of screws". Not being afraid of screws, I removed the unit and took it home to work on it on my workbench, that's when I discovered the cage could not be turned. Looking at the pictures on their web site, it is obvious that top, left and right discharges have totally different fan cages.
Hope this helps some and good luck with your install.
Bob

Please Log in or Create an account to join the conversation.

Time to create page: 0.175 seconds
Powered by Kunena Forum