scupper hose size

More
3 years 2 months ago #2522 by Tony Lesak
scupper hose size was created by Tony Lesak
hello all,
I am inprocess of replacing the 2 main cockpit scupper hoses. I am in Florida and the boat is up in Canada LOL
I am trying to get new hoses and I am not sure if they are 2" or larger in ID
can nanyone help
thank you
Tony

Please Log in or Create an account to join the conversation.

More
3 years 2 months ago #2523 by Scott Lee
Replied by Scott Lee on topic scupper hose size
I don't have the size off hand and I am also a similar distance from my boat. But I recall when I did those hoses on JdV (1976 #88) that the scupper fitting and the through hull fitting were different sizes and required a reducer fitting between them.

Scott

Please Log in or Create an account to join the conversation.

More
3 years 2 months ago #2524 by Gerry O'Donoghue
Replied by Gerry O'Donoghue on topic scupper hose size
The scupper fitting is 2 1/4 I.D., at least on a 1977 hull . As Scott said the through hull will probably require an adapter. Make sure that adapter is BRONZE not BRASS.


Attachments:

Please Log in or Create an account to join the conversation.

More
3 years 2 months ago #2525 by Gerry O'Donoghue
Replied by Gerry O'Donoghue on topic scupper hose size
While we are on the subject, any boat-owner who who hasn't learned from RC Collins needs to;

Bronze versus Brass


Great Marine Maintenance info.

Please Log in or Create an account to join the conversation.

More
3 years 2 months ago #2526 by Tony Lesak
Replied by Tony Lesak on topic scupper hose size
Hi all,
thank you for your replies, I will use the 2 1/4 hose and change the fitting at the thru hull.

thx again

Please Log in or Create an account to join the conversation.

Time to create page: 0.159 seconds
Powered by Kunena Forum