Rear transmission seal replacement

11 years 2 months ago #149 by John Meskauskas
Rear transmission seal replacement was created by John Meskauskas
Laume II is Hull #2 with a Perkins with the BW Velvet Touch tranny and a MaxiProp. The rear seal is shot, leaking about an ounce every two hours. Is it possible to change the seal in the water or does it have to come out? A diver tells me there is only about 3" of space behind the prop. If a diver can remove the prop, I would assume that the shaft can come back enough to clear the coupling, etc. Any experience with this process would be much appreciated



Please Log in or Create an account to join the conversation.

Time to create page: 0.113 seconds
Powered by Kunena Forum